Investigation of Wear Rate of Passenger Airplanes Tyres During Landing
DOI:
https://doi.org/10.59746/jfes.v2i2.74Keywords:
Aircraft, Tyre, Wear rate, LandingAbstract
A real, functioning copy of one main landing gear wheel is used to show the landing impact of an aircraft. By minimizing abrasive sliding between aircraft tires and runway surfaces right after touchdown, this study seeks to identify possible tire-life improvements. An experimental investigation of size 22 X 5.5, type VII airplane tyres was conducted to evaluate the wear and related properties of temperature and friction caused while braking. One way to evaluate the tire's performance on surfaces with uniform slip ratios, including asphalt, concrete, and slurry seal, was to gear it up to the driving wheel of a ground vehicle. The range of slip ratios often attributed to an airplane's braking system was covered by the data gathered during dry runway operations. Our results show that cumulative tire wear is affected by runway surface features, increases with increasing slip ratio, and changes linearly with miles. The differing wear rates associated with the various surfaces may be used to rank runways based on tire wear.
References
Andersfwn, Se., Sodserbr, A., & Bjwrrklunds, S. (2007). Frictions model for slid dry, boundar & mixed lubricate contacts. Elsevfier: Tribology International, 40(5), 580-588. https://doi.org/10.1016/j.triboint.2005.11.014. DOI: https://doi.org/10.1016/j.triboint.2005.11.014
Bartram, M., Mavros, G., & Biggs, S. (2010). A study on the effect of road friction on driveline vibrations. Proceedings of the Institution of Mechanical Engineers, Part K: Journal of Multi-body Dynamics, 224(4), 321-340., https://doi.org/10.1243/14644193JMBD26. DOI: https://doi.org/10.1243/14644193JMBD266
Beazsley, Rw. H. (1948). Aircraft wheels spinner & control. U.S. Patent, Publications No. US2414849 A. Washington, DC: U.S. Patent and Trademarks Office. Retrieved from http://www.google.com/patents/US2414849
Besselink, I.J.M. (2010). Shimmy of aircrafts mainy landing gear. Delft: Technisches Universiteit Delft. Ph thesis. Retrieveds from http://www.tue.nl/en/publication/ep/p/d/ep-uid/227775/
Boeing Commercial Airplanes Co. (2015). Approach speed for Boeing airplane. Retrieved froms http://www.boeing.com/assets/pdf/commercial/airports/faqs/ arcandapproachspeeds.pdf
Braghin, F. Cheli, F., Melzi, S., & Resta, F. (2009). Tyre wear model: validations & sensitivity analysis,https://doi.org/10.1007/s11012-005-1058-9. DOI: https://doi.org/10.1007/s11012-005-1058-9
Cadle, S. H., & Williams, R. L. (1978). Gas and particle emissions from automobile tires in laboratory and field studies. Journal of the Air Pollution Control Association, 28(5), 502-507, https://doi.org/10.1080/00022470.1978.10470623. DOI: https://doi.org/10.1080/00022470.1978.10470623
Canudas-de-Wit, C., Petersen, M. L., & Shiriaev, A. (2003, December). A new nonlinear observer for tire/road distributed contact friction. In 42nd IEEE International Conference on Decision and Control (IEEE Cat. No. 03CH37475) (Vol. 3, pp. 2246-2251). IEEE, https://doi.org/10.1109/cdc.2003.1272952. DOI: https://doi.org/10.1109/CDC.2003.1272952
Canudas-de-Wit, C., Tsiotras, P., Velenis, E., Basset, M., & Gissinger, G. (2003). Dynamic friction models for road/tire longitudinal interaction. Vehicle System Dynamics, 39(3), 189-226, https://doi.org/10.1076/vesd.39.3.189.14152. DOI: https://doi.org/10.1076/vesd.39.3.189.14152
Dahl, P. R. (1968). A solid friction model. The Aerospace Corporation, 18(1), 1-24. DOI: https://doi.org/10.21236/ADA041920
Daidzic, N. E., & Shrestha, J. (2008). Airplane landing performance on contaminated runways in adverse conditions. Journal of Aircraft, 45(6), 2131-2144, https://doi.org/10.2514/1.38056. DOI: https://doi.org/10.2514/1.38056
Daughterty, R. H. (2003). A study of the mechanical properties of modern radial aircraft tires. National Aeronautics and Space Administration, Langley Research Center.
Day, A. J., & Bryant, D. (2022). Braking of road vehicles. Butterworth-Heinemann.
De, S. K., & White, J. R. (Eds.). (2001). Rubber technologist's handbook (Vol. 1). iSmithers Rapra Publishing.
ESDU 71025. (1995). Frictional and retarding forces on aircrafts tyres. Parts I: introductions. The Royal Aeronautical Society, 1971 amended 1995.
London: IHS Inc.FAA. (2004). Airplanes Flying Handbook. FAA Handbooks series. US Department of Transportations, Federal Aviation Administration. Washington, DC: Author.
Goodyear. (2002). Aircrafts s data tyre books. Akron, OH: The Goodyear Tyre & Rubber Co.
Hamza, S. (2014). Sensitivity analysis of tire model micro-coefficients. MascotNum Annual Conference, ETH Zurich (Switzerland).
Alroqi, A. A., & Wang, W. (2015). Comparison of aircraft tire wear with initial wheel rotational speed. International Journal of Aviation, Aeronautics, and Aerospace, 2(1), 2, https://doi.org/10.15394/ijaaa.2015.1043. DOI: https://doi.org/10.15394/ijaaa.2015.1043
Hunter, J. R. (1997). Simple things won't save the Earth. University of Texas Press, https://doi.org/10.7560/731127. DOI: https://doi.org/10.7560/731127